Σχολή Χημικών Μηχανικών και Μηχανικών Περιβάλλοντος

Μόνιμο URI για αυτήν την κοινότηταhttps://dspace.library.tuc.gr/handle/123456789/132

Μέχρι και τον Ιούνιο του 2021 η σχολή Χημικών Μηχανικών και Μηχανικών περιβάλλοντος ονομαζόταν Σχολή Μηχανικών Περιβάλλοντος.

Νέα

4

Περιηγούμαι

Πλοήγηση Σχολή Χημικών Μηχανικών και Μηχανικών Περιβάλλοντος ανά Συγγραφέα "Arturo A. Keller"

Φιλτράρετε τα αποτελέσματα πληκτρολογώντας τα πρώτα γράμματα
Τώρα δείχνει 1 - 1 από 1
  • Δεν υπάρχει διαθέσιμη μικρογραφία
    Δημοσίευση
    Early breakthrough of colloids and bacteriophage MS2 in a water-saturated sand column
    (2004) Chrysikopoulos Constantinos; Χρυσικοπουλος Κωνσταντινος; Arturo A. Keller; Sanya Sirivithayapakorn
    We conducted column-scale experiments to observe the effect of transport velocity and colloid size on early breakthrough of free moving colloids, to relate previous observations at the pore scale to a larger scale. The colloids used in these experiments were bacteriophage MS2 (0.025 mm), and 0.05- and 3-mm spherical polystyrene beads, and were compared with a conservative nonsorbing tracer (KCl). The results show that early breakthrough of colloids increases with colloid size and water velocity, compared with the tracer. These results are in line with our previous observations at the pore scale that indicated that larger colloids are restricted by the size exclusion effect from sampling all paths, and therefore they tend to disperse less and move in the faster streamlines, if they are not filtered out. The measured macroscopic dispersion coefficient decreases with colloid size due to the preferential flow paths, as observed at the pore scale. Dispersivity, typically considered only a property of the medium, is in this case also a function of colloid size, in particular at low Peclet numbers due to the size exclusion effect. Other parameters for colloid transport, such as collector efficiency and colloid filtration rates, were also estimated from the experimental breakthrough curve using a numerical fitting routine. In general, we found that the estimated filtration parameters follow the clean bed filtration model, although with a lower filtration efficiency overall.